What is a bashlyk and how to knit it

The hood is a comfortable and multifunctional scarf with a hood that looks stylish and unusual. In addition, it perfectly protects its owner in the cold season from wind and weather. Below you will find a description with diagrams that will help you knit this unique product.

How to tie a scarf hood

Before you start knitting by description, let's look at the basic parameters: the length of the finished hat (part of the scarf without brushes) has a length of two hundred and ten centimeters, and the width is thirty. The dimensions of the hood itself are seventy-two by eighty-four centimeters.

For knitting, you need to prepare a primary color yarn, containing wool and silk as a percentage of 75:25 (two hundred meters per hundred grams). All you need is a thousand grams. Also, you should use knitting needles at number seven, one additional spoke, and also a hook at number seven.

The front smooth surface consists of front rows with front loops and purl, respectively with purl.

To create a garter stitch, the front and purl rows are knitted with facial buttonholes.

The presented hood fits in with the beautiful “Scythe” pattern, according to schemes A and B. The front rows (LR = odd) are knitted from the right side to the left, and the back (IR = even) are knitted according to the figure.

Rapport consists of sixteen p., Which are executed in width once. At the same time, repeats from the first to the tenth pp.

If we talk about edge loops, then knitting a knotted edge is as follows: the initial and final loops (p.) In a row (ie edge) in all p. are tied as individuals.

The knitting density of this product is as follows: thirteen points to twenty p. = ten to ten centimeters of persons. smoothing; sixteen p. pattern "Braids" = seven and a half centimeters wide. Each of the samples for the hood is knitted with a thread in two additions. Therefore, note that knitting is carried out on the basis of a double thread.

Pattern and knitting patterns for work, you can find in the article.

So, we will consider how to knit an original scarf with knitting needles. In the first stage, knitting begins at the right end of the product. First of all loops are gathered.Thread in two additions, dial fifty-two p. Further distribution of p.: Edge (fit as a person.), Four p. Garter stitch, sixteen p. Pattern "Braids" (scheme A), ten p. Persons. stitch, sixteen n. "Braids" (scheme B), four n. garter viscous, edging (as persons.).

Knitting seventy centimeters (ie, one hundred and forty p.) In izn. R. forty-six paragraphs are closed and on the remaining six - they continue the process in a plate-like manner of the front planochka of the hood (chrome. They knit together as individuals).

Having plucked the bar of a bashly with a length of thirty-six centimeters (= seventy-six p.). buttonholes are translated into an additional thread.

Next, go to the knitting of the left end of the hood. It is similar to the right one, only the front hood for the hood is knitted with knitting needles from the left edge. This is done as follows: having knitted one hundred thirty-nine p., Forty-six p is closed in the subsequent purl, and on the remaining six, a thirty-six cm long bar is performed, after which the loops are transferred to an additional thread.

We continue to knit with the spokes of the bashlyk and proceed to the description of the work on the hood. Type a hundred and six points on knitting needles with a thread in two additions and continue knitting.The scheme of work, the following: edge (as persons.), 4 p. Garter viscous, sixteen p. "Spit" (scheme A), sixty-four p. Persons. smooth, sixteen "Scythe" (Scheme B), four - garter stitch, chrome. (as individuals.).
After knitting fifty-six cm (= one hundred and twelve p.), Mark the two central sections and begin to make additions and additions. This is done in this way: edge, four scarves, six persons “Spit” (scheme A), one person. etc., two together. with a bias on the left side (one p. is removed as the front, one face. (LP), after that it is pulled through the removed p.), twenty-eight p. one side of the broach is knitted in front of the two marked central n. cross, two central persons are tied., 1 person is dragged out of the broach. a cross, twenty-eight persons. smoothing, two knit together persons., 1 LP, sixteen pattern "Braids" (scheme B), 4 p. in the facial manner, edging (as persons.). As a result, after decreasing additions on the needles, the same number of loops should form.
Such reductions and additions are performed in all the second rows seven more times. Next, continue knitting the hood on the basis of the previous distribution of buttonholes.

After knitting eighteen centimeters (thirty-six p.) From the final decreases and additions to form the rear bevel of the hood, continue to work on the basis of shortened rows. Here in the faces. R. knit on the pattern to the final point in front of the center, turn with the help of a nakida and wrong p. Until the end. The loops of the left half while set aside.

Subsequently, p. Knit up to two in front of the loop of a turn and turn it with the help of a jib. Next, all the second rows will be shortened: once by two points, two times by three and two more by four, while each time a turn is made with the help of a nakida. After that, the loops of the right side set aside, and tie the buttonholes of the left side symmetrically. To do this, from the center, knit shortened rows: 1 time for one p., 2 - for two, 2 - for three and 2 - for four. Now p. Left shelf can be postponed.

To assemble the hood, all the elements are punctured into a pattern, moistened and dried. Buttonholes that were previously set aside (6 times the front plank of the hood) are connected with a “loop in a loop” seam. Here each n. Turn with the subsequent n. Are considered as 1 n.

The hood is sewn to the scarf, as the pattern shows.Bashlyk is almost ready. It remains to make brushes for him. Each of these parts is made on the basis of nine threads in forty centimeters. They fold in half, then the hook is taken, which helps stretch the tip with the fold through the bonded fabric. Thus the loop is obtained. Then, loose thread tips, pass through this buttonhole and tighten it.

Total for this hood you need to attach seventeen brushes at the same distance from one another.

As you can see, the work has to be quite painstaking, but judging by the photo of the finished product - in finished form, the hood is striking in its luxurious beauty.