How to insulate the VAZ?
One of the main and acute problems of the car VAZ in the winter time is cold. The time spent on warming up the car and the cabin is really huge. But many still do not like the amount of fuel that is spent on this procedure. That is why any motorist question how to warm the VAZ 2110, is in the first place. Moreover, the procedure itself is quite simple, only you need to carve out for this time, which will pay off by the rapid heating of the car in the winter. To insulate the car, you should acquire the following: heat insulation and sealant glue.
We warm the interior
First of all, you should insulate the interior of your VAZ. To do this, remove the seat and gear knob, and then unscrew the lining on the racks and sills. Now you can begin to twist the material that lies on the floor of the car (carpet, linoleum, or others). As a rule, such materials are not a good holder of heat, so it may be necessary to replace them.After that, you can start laying insulation on the floor of the VAZ. But first you need to cut the insulation in shape. It is necessary to try to lay insulation on the largest possible area. In addition, you can lay and sound insulation, and only after that put carpet.
We warm the body and doors
First you need to remove the torpedo, after which you will see the non-warmed part of the body, which is simply metal. It is necessary to apply a “sealant” on the body and stick thermal insulation to it. After the insulation of this part of the car, you can put the dashboard back and proceed to the weatherization of the doors. To do this, remove the door panels, and then with the help of "sealant" to stick heat-insulating material onto the door panels. It is also recommended to warm the interior of the doors, which is a metal construction only. After completion of the work should be assembled door panels and proceed to the warming of the body. The first step is to remove the hood lid and glue insulating material on it. In addition, you must put the insulation on the grille, but do not need to glue it.
We warm the battery and trunk
If you think that you have found an exhaustive answer to the question of how to insulate a VAZ, then it is not quite so that the car is fully insulated, something else should be done for the battery and trunk. So for the first you can sew a special insulating cover. If present, the battery will cool down more slowly and it will be easier to start the car in winter. Then we open the trunk and apply thermal insulation on its interior trim and cover. Also, do not be amiss to take care of the purchase of overlays on the gas tank.